Tips for Scuba Diving & Gear : How to Mount the Regulator to Tank: Scuba Gear Basics
expertvillage asked:
Learn how to mount the regulator to the tank in scuba diving in this free video on scuba gear.
Turn the gauge console face down and adjust the BCD height to the tank have been mentioned. Also crack the tank to dedust o-ring, visualy inspect and blow out the dust cap and 1st stage(filter), depress the purge on the second stages as you open the tank, open the tank valve all the way then quarter turn back, and last but not least fill the BCD completely and check for leaks before diving.
Ok Your Supposed to Flip The Pressure Gauge Over So That The Glass Part is Facing Down Away From Your Face. then you Slowly Turn The Air On.
what a noob I don’t he even went though basic training.
if you are going to instruct, do it properly.Align BCD to correct height before tightening straps???check o-ring and position 1st stage right way up, gauge face down when opening valve, watching gauge when breathing from regs and plenty more.
LOL,Did you ever think to turn the pressure gauge away from you when you turn you tank on????? I here pop oooops my eye.